 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Gated PMT Modules H7680/-01 The H7680/-01 PMT modules are capable of high-speed, high-repetition gated operation. An optimum design in the combination of circuit and photomultiplier tube delivers excellent gating characteristics including a minimum gate width of 30 ns (H7680-01), 100 kHz repetition rate, and a gate extinction ratio of 107. The H7680/-01 can operate on a low +15 V supply because of incorporating high-voltage power suppy circuit. And, the incorporated PMT gain can be controled by adjusting the control voltage between +2 V to +5 V. Product Variations Type No. H7680 H7680-01 Spectral Response 300 nm to 650 nm Normally ON type Normally OFF type Features Specifications Parameter Supply Voltage Max. Input Voltage Max. Input Current Max. Surge Current Effective Area Peak Sensitivity Wavelength Pulse Linearity *1 Max. Output Signal Current Operating Ambient Temperature Storage Temperature Weight H7680 / H7680-01 +14 to +16 +17 400 4.0 24 420 100 100 +5 to +40 -20 to +50 850 Unit V V mA A mm nm mA A C C g Parameter Photocathode Material Window Material Dynode Structure Number of Dynodes Cathode Luminous Sensitivity Character- Radiant Sensitivity *2 istics Blue Sensitivity Index (CS 5-58) Luminous Sensitivity Anode Radiant Sensitivity *2 CharacterTyp. istics *1 Dark Current *3 Max. Gain *1 Rise Time Time *1 Transit Time Response TTS H7680 / H7680-01 Bialkali Borosilicate glass Linear focused type 10 95 88 11.0 475 4.4 x 105 10 200 5 x 106 1.7 16 500 Unit -- -- -- -- A/lm mA/W -- A/lm A/W nA -- ns ns ps *1: Control voltage = +4.5 V *2: Measured at the peak sensitivity wavelength *3: Measured when photomultiplier tube operation is ON. After 30 minute storage in darkness 52 PMT Module with Added Functions Parameter Mode Gate Width (FWHM) Rise Time, Fall Time Repetition Rate Gate Mode Switching Ratio Switching Noise *4 Delay Time Jitter Level Gate Signal Input Impedance Input Pulse Width Input Voltage Gain Control Input Impedance *4: Load resistance 50 , peak to peak H7680 Normally ON OFF time: 100 ns to Max. Max. Max. Max. Max. H7680-01 Normally OFF ON time: 30 ns to 20 100 107 60 200 1 C-MOS (High level: +3.5 V to +5 V) 50 100 ns to 30 ns to +2.0 to +5.0 10 Unit -- -- ns kHz -- mV ns ns -- -- V k Characteristics (Cathode radiant sensitivity, Quantum efficiency, Gain) TPMOB0148EA 100 CATHODE RADIANT SENSITIVITY 108 TPMOB0092EA CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 107 10 106 GAIN 1 QUANTUM EFFICIENCY 105 104 0.1 103 0.01 200 400 600 800 102 1 2 3 4 5 6 WAVELENGTH (nm) CONTROL VOLTAGE (V) 53 Gated PMT modules Gate Timing Chart H7680 (Normally ON Type) +3.5 V to +5 V at 50 GATE SIGNAL INPUT 0V 100 ns to PMT OPERATION OFF ON DELAY TIME : 200 ns MAX. MINIMUM GATE "OFF" TIME: 100 ns H7680-01 (Normally OFF Type) +3.5 V to +5 V at 50 GATE SIGNAL INPUT 0V 30 ns to PMT OPERATION OFF ON DELAY TIME : 200 ns MAX. MINIMUM GATE "OFF" TIME: 30 ns 10 s to 10 s to Gate time equals the pulse width of input gate signal. TPMOC0091EC Output Examples H7680 TIME H7680-01 TIME 0V 90 % 0V 10 % OUTPUT OUTPUT 100 ns to 50 % 30 ns to 50 % 10 % 90 % 10 ns 20 ns TPMOB0094EC 20 ns 10 ns TPMOB0093EC Block Diagram SIGNAL OUTPUT: OUTPUT CURRENT (BNC) PMT VOLTAGE DIVIDER CIRCUIT HIGH VOLTAGE POWER SUPPLY CIRCUIT GAIN CONTROL CIRCUIT CONTROL VOLTAGE INPUT GATE DRIVE CIRCUIT TIMING CIRCUIT GATE PULSE INPUT (BNC) GATE POWER SUPPLY CIRCUIT ERROR DETECTION CIRCUIT ERROR LED ERROR MONITOR POWER SUPPLY CIRCUIT OVER-LIGHT MONITOR REF. VOLTAGE OUTPUT INPUT VOLTAGE TPMOC0090EB 54 PMT Modules with Added Functions H7680/-01 Sensitivity Adjustment Method Voltage Programming GATE SIGNAL INPUT (C-MOS) BNC 6-pin RED BLACK BLUE Vref OUTPUT : *2 POWER SUPPLY +15 V GND BNC 6-pin Resistance Programming GATE SIGNAL INPUT (C-MOS) RED BLACK BLUE BNC YELLOW ERROR MONITOR : *1 WHITE POWER SUPPLY +15 V GND H7680, -01 BNC H7680, -01 YELLOW ERROR MONITOR : *1 GRAY OVER-LIGHT MONITOR : *1 POTENTIOMETER MIN. +2 V GAIN CONTROL 10 k MAX. +5 V +2 V to +5 V WHITE CONTROL VOLTAGE GND SIGNAL OUTPUT GRAY OVER-LIGHT MONITOR SIGNAL OUTPUT : *1 *1: Not necessarily used. *2: Do not use. TPMOC0092EB *1: Not necessarily used. TPMOC0093EC Dimensional Outline (Unit: mm) PHOTOCATHODE ( 24) 58.0 0.5 20.0 0.5 13.0 0.2 170.0 0.5 13.0 0.2 DC/CONT ERROR POWER/CONTROL (6-PIN) 1: GND 2: LOW VOLTAGE INPUT (+15 V) 3: Vcontrol INPUT 4: Vref OUTPUT 5: ERROR MONITOR 6: OVER-LIGHT MONITOR GATE 84.0 0.5 28.0 0.2 74.0 0.2 26.0 0.2 SIGNAL OUT GATE SIGNAL INPUT (BNC-R) 5.0 0.2 26.0 0.2 50.0 0.2 1"-32UN (C-MOUNT) FRONT VIEW 16.0 0.5 73.0 .05 50.0 0.2 SIDE VIEW ERROR LED SIGNAL OUTPUT (BNC-R) REAR VIEW 98.0 0.5 25.0 0.2 29.0 0.5 20.0 0.2 20.0 0.2 1/4"-20 UNC DEPTH: 5 20.0 0.2 20.0 0.2 BOTTOM VIEW 4-M3 DEPTH: 5 Power cable with connector (HIROSE HR10A-7P-6S) is supplied with H7680/-01. RED : WHITE : BLUE : GRAY : YELLOW : BLACK LOW VOLTAGE INPUT (+15 V) Vcontrol INPUT (+2 V to +5 V) Vref INPUT OVER-LIGHT MONITOR ERROR MONITOR : GND 450 20 TPMOA0002ED 55 |
Price & Availability of H7680
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |